Saf-Ip300.hd Инструкция
Download File ---> https://shoxet.com/2tvPAA
How to Install and Use the Saf-Ip300.hd Dome IP Camera with IR Illumination
The Saf-Ip300.hd is a dome megapixel IP camera with IR illumination up to 20 m. It can be used for indoor or outdoor surveillance and has a resolution of 1280 x 720 pixels. In this article, we will show you how to install and use the Saf-Ip300.hd camera with some basic steps.
Installation
Before installing the camera, make sure you have the following items: a power adapter, an Ethernet cable, a drill, screws and anchors, a screwdriver, and a computer with Internet access.
Find a suitable location for the camera, preferably near a power outlet and an Ethernet port. Avoid direct sunlight, extreme temperatures, and humidity.
Drill holes on the wall or ceiling according to the mounting template provided with the camera. Insert the anchors and screws into the holes.
Attach the camera base to the wall or ceiling with the screws. Make sure the base is firmly fixed.
Connect the power adapter to the camera and plug it into an outlet. Connect the Ethernet cable to the camera and to your router or switch.
Adjust the angle and direction of the camera lens by loosening the screws on the dome cover and rotating the lens module. Tighten the screws after adjusting.
Replace the dome cover and secure it with the screws.
Usage
To access the camera from your computer, you need to install a web browser plug-in called IPCWebComponents. You can download it from this website[^1^].
Open your web browser and enter the IP address of the camera in the address bar. The default IP address is 192.168.1.10. You may need to change it according to your network settings.
Enter the username and password to log in. The default username is admin and the default password is 123456.
You will see a live video stream from the camera on your browser. You can also adjust some settings such as image quality, motion detection, alarm, network, etc.
To view the camera from your smartphone or tablet, you need to install an app called SafCam. You can download it from Google Play or App Store.
Open the app and tap on Add Device. Scan the QR code on the camera or enter its information manually.
You will see a live video stream from the camera on your app. You can also take snapshots, record videos, talk back, etc.
We hope this article has helped you to install and use the Saf-Ip300.hd dome IP camera with IR illumination. If you have any questions or problems, please contact us at support@se-cam.ru.Troubleshooting
If you encounter any problems with the Saf-Ip300.hd dome IP camera with IR illumination, you can try the following solutions:
If you cannot access the camera from your web browser, make sure you have installed the IPCWebComponents plug-in and allowed it to run. You can also try a different web browser or update your plug-in.
If you cannot access the camera from your app, make sure you have entered the correct IP address, username, and password. You can also check your network connection and firewall settings.
If the image quality is poor or distorted, make sure the camera lens is clean and not blocked by any objects. You can also adjust the image settings such as brightness, contrast, saturation, etc.
If the IR illumination is not working properly, make sure the camera is in night mode and the IR LEDs are not covered by any objects. You can also adjust the IR settings such as sensitivity, distance, etc.
If the motion detection or alarm is not working properly, make sure the camera is in alarm mode and the motion detection area and sensitivity are set correctly. You can also adjust the alarm settings such as schedule, action, notification, etc.
If none of these solutions work, you can reset the camera to its factory default settings by pressing and holding the reset button on the camera for 10 seconds. Please note that this will erase all your settings and data.
If you still need help, please contact us at support@se-cam.ru or call us at +7 (495) 150-15-15. We will be happy to assist you. aa16f39245